LSM303DLH 是3D數字線性加速度傳感器和3D數字磁傳感器,滿刻度的線性加速度為±2 g / ±4 g / ±8 g,滿刻度磁場為±1.3/±1.9/±2.5/±4.0/±4.7/±5,6/±8.1高斯,兩者都由用戶選擇.模擬工作電壓2.5V-3.3V,數字電源I/O電壓為1.8V,3個磁場通路和3個加速度通路,6D取向檢測,主要用在地圖旋轉和顯示器取向,電子羅盤,手持設備,震動檢測和補償等.本文介紹LSM303DLH主要特性, 電連接圖和采用I2C快速模式的電連接圖.
The LSM303DLH is a system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor. The various sensing elements are manufactured using specialized micromachining processes, while the IC interfaces are realized using a CMOS technology that allows the design of a dedicated circuit which is trimmed to better match the sensing element characteristics. The LSM303DLH has a linear acceleration full-scale of ±2 g / ±4 g / ±8 g and a magnetic field full-scale of ±1.3/±1.9/±2.5/±4.0/±4.7/±5,6/±8.1 gauss, both fully selectable by the user. The LSM303DLH includes an I2C serial bus interface that supports standard mode (100 kHz) and fast mode (400 kHz). The internal self-test capability allows the user to check the functioning of the whole module in the final application. The system can be configured to generate an interrupt signal by inertial wakeup/free-fall events, as well as by the position of the device itself. Thresholds and timing of interrupt generators are programmable on the fly by the end user. Magnetic and accelerometer parts can be enabled or put in power-down mode separately. The LSM303DLH is available in a plastic land grid array (LGA) package, and is guaranteed to operate over an extended temperature range from -30 to +85℃.

LSM303DLH 主要特性:
■ Analog supply voltage: 2.5 V to 3.3 V
■ Digital supply voltage IOs: 1.8 V
■ Power-down mode
■ 3 magnetic field channels and 3 acceleration channels
■ ±1.3 to ±8,1 gauss magnetic field full-scale
■ ±2 g/±4 g/±8 g dynamically selectable fullscale
■ 16-bit data out
■ I2C serial interface
■ 2 independent programmable interrupt generators for free-fall and motion detection
■ Embedded self-test
■ Accelerometer sleep-to-wakeup function
■ 6D orientation detection
■ ECOPACK® RoHS and “Green” compliant

LSM303DLH 應用:
■ Compensated compassing
■ Map rotation
■ Position detection
■ Motion-activated functions
■ Free-fall detection
■ Intelligent power-saving for handheld devices
■ Display orientation
■ Gaming and virtual reality input devices
■ Impact recognition and logging
■ Vibration monitoring and compensation

圖1.LSM303DLH 方框圖

圖2.LSM303DLH電連接圖(1): 推薦的I2C快速模式

圖3.LSM303DLH電連接圖(2)